English French German Italian Portuguese Russian Spanish

Aramid Fibre Packing’s

ITK® STYLE 220
Composite Aramid Fibre packing

Product Description

ITK® style 220 is made of composite fibres making it exceptionally suitable for paper mill and sugar mil industries, This packing exhibits the properties of low friction and high heat resistant.

 

Service Characteristics

Service Characteristics
Temperature: -100°C to +280°C
pH Range: 0 to 14
Rotary Shaft Speed: 22m/s
Pressure: 120bar or 1740psi

Typical Application Areas

ITK® style 220 used in sugar mill and paper mill industries

ITK® STYLE 225
Graphite/PTFE packing reinforced with Yellow Aramid on corners

Product Description

ITK® style 225 is a high quality braided packing made of PTFE yarns blended with Graphite and Aramid fibres are reinforced on the corners with special lubricants. This packing demonstrates high tensile strength of aramid fibre and graphite impregnated PTFE self-lubricating fibres diagonally positioned and braided to produce a low friction, wear-resistant packing's. High quality combination of graphite impregnated with PTFE and edge finished reinforcement made from aramid yarn to prevent gap extrusion in high pressure and high temperature applications. Excellent sliding properties and thermal conductivity. Used frequently in positive displacement pumps and plunger pumps.

 

Service Characteristics

Service Characteristics
Temperature: -120°C to +280°C
pH Range: 0 to 14
Rotary Shaft Speed: 25m/s
Pressure: 250bar or 3600psi

Typical Application Areas

Graphite PTFE Aramid packing is recommended for rotary, centrifugal, and reciprocating movement applications, or for equipment with bigger clearances. Suitable in applications such as sewage, paper pulp, hot water, oils, grease, sea water as well as relatively mild acids and alkaline solutions.

ITK® STYLE 221L/ITK® STYLE 22
Yellow Aramid fibres impregnated with Graphite powder

Product Description

ITK® style 221L is manufactured from Aramid fibres impregnated with graphite powder and treated with special lubricants and corrosion inhibitors.

ITK® style 221D is blend of yellow aramid graphitised fibre packing reinforced with Inconel wire suitable to replace traditional packing with high temperature and pressure capabilities.

 

Service Characteristics

Service Characteristics
Temperature: -100°C to +320°C
pH Range: 0 to 14
Rotary Shaft Speed: 15m/s (221L) , 1m/s (221D)
Pressure: 250bar or 3600psi (221L) , 400bar or 5800psi (221D)

Typical Application Areas

General Purpose packing use against oil water, steam, ITK® style212D is suitable for higher temperature and pressure application with static use only.

Scroll to top